Otto Blade


Otto Blade

SKU Otto Blade Firm Kategória



The Otto was designed with the idea to challenge the fixed distance of 165mm between the cups. This has been achieved by the use of a bridge connecting the front and the back together with a span of 215mm while keeping the 165mm mounting points on the boot.

Another great benefit of the blade is that with the bridge design the bendingchanges a lot less to almost nothing at the start.

Tube Styles

We have a couple of variations available all with a spacing of 215mm, at the moment this seems to be the sweet spot but we may go for a bigger spacing in the future. The tubes are available in Flex and Firm whereas the Flex is in normal Flex and Flex FT. Where Firm gives the most pressure and the Flex FT the least. The pressure difference between a Firm and a Flex is a bit more noticeable than that of the M-Wave. The pressure with a Flex is comparable to that of a Firm M-Wave.


After feedback of skaters like Shaolin, Wu Dajing and Viktor An we found there is no optimal setup for the skate. You can tune it to your own likings. If you want long powerful strokes you go for a flatter rocker in the middle and a bit less bend than normal (roughly 2 less than the M-Wave on a Marchese style gauge). If you rather want a lot of steering and more agile feeling you can keep a normal rocker with a lot less bend (about 5 less). Also let the bend increase less towards the front.

One thing some skaters experience is that the blade is digging in with the front at high speed laps. This can be solved by making the front more round. Or using less bend with the later a more easy solution.

További információk

Penge méret

15,50", 15,75", 16,00", 16,25", 16,50", 16,75", 17,00", 17,25", 17,50", 17,75", 18,00", 18,25", 18,50", 18,75", 19,00"

Penge Típus

Firm Bi-M, Firm Flat Top, Firm PM, Flex Bi-M, Flex Flat Top, Flex PM


Még nincsenek értékelések.

„Otto Blade” értékelése elsőként

Az e-mail címet nem tesszük közzé. A kötelező mezőket * karakterrel jelöltük